[RESOLVED] textbox not updating

Hi All,

i have a dynamic textbox that its displaying the wrong value

Code:

---

Folds = 1;
                        tDev20F25 = Number(Size2.text) + Number(Sel1Fac0F25);
                        Dev2.text = tDev20F25.toFixed(3).toString();
                        trace("tDev20F25 "+tDev20F25);
                        trace("Number(Size2.text) "+Number(Size2.text));
                        trace("Number(Sel1Fac0F25) "+Number(Sel1Fac0F25));
                        trace("Dev2.text "+Dev2.text);
                        trace("tDev20F25.toFixed(3).toString() "+tDev20F25.toFixed(3).toString());

---

instance Dev2 shows -5.316
all trace entrys above show -2.655 which is correct

before this script ran the value was -5.316

any ideas?

fla is too big to attach

cb are check boxes

the error is when this is triggered by cb3 when cb4 is also checked
if cb4 is not checked then the textbox updates fine

Code:

---

cb3.addEventListener(MouseEvent.CLICK, Checkboxhit);
cb4.addEventListener(MouseEvent.CLICK, Checkboxhit);
cb5.addEventListener(MouseEvent.CLICK, Checkboxhit);

function Checkboxhit(event:MouseEvent):void {
        var cbox = event.currentTarget.name.slice(-1);
        switch(cbox){
                case "3":
                if (cb3.selected == true){
                        Size3i.visible = true;
                        Size3.visible = true;
                        Dev3.visible = true;
                        ang2.visible = true;
                        Line4.visible = true;
                        cb4.visible = true;
                        TID4.visible = true;
                        Size3.tabIndex = 3;
                        Folds = 2;
                        ang2.dispatchEvent(new Event(Event.CHANGE));
                }else{
                        Folds = 1;
                        tDev20F25 = Number(Size2.text) + Number(Sel1Fac0F25);
                        Dev2.text = tDev20F25.toFixed(3).toString();
                        trace("tDev20F25 "+tDev20F25);
                        trace("Number(Size2.text) "+Number(Size2.text));
                        trace("Number(Sel1Fac0F25) "+Number(Sel1Fac0F25));
                        trace("Dev2.text "+Dev2.text);
                        trace("tDev20F25.toFixed(3).toString() "+tDev20F25.toFixed(3).toString());
                        ang1.dispatchEvent(new Event(Event.CHANGE));
                        tDev30F25 = 0;
                        tDev40F25 = 0;
                        tDev50F25 = 0;
                        tDev60F25 = 0;
                        tDev70F25 = 0;
                        tDev80F25 = 0;
                        tDev90F25 = 0;
                        Size3i.visible = false;
                        Size3.visible = false;
                        Dev3.visible = false;
                        ang2.visible = false;
                        Line4.visible = false;
                        cb4.visible = false;
                        TID4.visible = false;
                       
                        if (cb4.selected == true){

                                cb4.dispatchEvent(new MouseEvent(MouseEvent.CLICK));
                        }else{
                               
                        }
                       
                }
                break;
                case "4":
                if (cb4.selected == true){
                        Size4i.visible = true;
                        Size4.visible = true;
                        Dev4.visible = true;
                        ang3.visible = true;
                        Line5.visible = true;
                        cb5.visible = true;
                        TID5.visible = true;
                        Size4.tabIndex = 4;
                        Folds = 3;
                        ang3.dispatchEvent(new Event(Event.CHANGE));
                }else{
                        Size4i.visible = false;
                        Size4.visible = false;
                        Dev4.visible = false;
                        ang3.visible = false;
                        Line5.visible = false;
                        cb5.visible = false;
                        TID5.visible = false;
                        Folds = 2;
                        tDev40F25 = 0;
                        tDev50F25 = 0;
                        tDev60F25 = 0;
                        tDev70F25 = 0;
                        tDev80F25 = 0;
                        tDev90F25 = 0;
                        if (cb5.selected == true){
                                cb5.dispatchEvent(new MouseEvent(MouseEvent.CLICK));
                        }
                        ang2.dispatchEvent(new Event(Event.CHANGE));
                }
                break;
                case "5":
etc

---

Attachment 75227

Hi,

It might be easier to see the *.fla than to go through that lot, if you can attach it and associated stuff (if any)

or create a downloadable link

https://www.dropbox.com/s/xtzdq4fr8zb5rmh/fold.fla?dl=0

frame 25 - actions layer

thanks
[edit]
you may need the xml file (below) generated by "http://ts-server/WebBook/bend3xml.php"

https://www.dropbox.com/s/4znes5hvafdogyx/xml.txt?dl=0
[/edit]

Hi,

I didnt need the xml as I used my own server, I have no idea where to begin with your file, I'm not even sure what I should be doing with it.
i enter a few numbers and thats it?

None of the small combos have anything in them either ??

When i test it flash it is full of errors too, perhaps you might want to import the xml locally for testing, rather than try to get it from the web from within flash, then do the online one.


If you can explain where in the swf when you use it what is going on.

Sorry

Hi, the combo's are populated with the xml file.

its generated by php from mysql.

the whole swf works fine,

except if you click (1 - 8 ) then click check boxes 3, 4, 3 you see the error. (4 appears when you check 3 )
if you click check boxes 3, 4, 4, 3 there is no error.
the trace lines display the correct numbers for both sequences the Dev2 text box shows -5.316 on screen but trace(Dev2.text); shows -2.655 on the 3 4 3 sequence

FLA = https://www.dropbox.com/s/6chkvltzaqwdv0b/local.fla?dl=0
XML = https://www.dropbox.com/s/sqjcqz9kt2gmpyv/fold.xml?dl=0

P.S. its for developing lengths for folding metal.
if you click on the numbered buttons, the numbers are how many folds are required.

ie click the 2 in the U shape:
the 3 red boxes are looking for millimeters say 50, 100, 50 would make a channel 100mm with with 50mm "legs"
the "in" boxes are for converting from inches, the numbers above those are the minimum sizes the machine can handle
with the selected parameters.
the default parameter setting when loading that screen is 3mm thick mild steel bent to 90 degrees using a 20mm wide tool.
its bend deduction for that set up is -2.655mm per corner, ( deducted once for the sides and twice for the bottom )
giving you 47.345, 94.69, 47.345 so the length that needs laser cutting from 3mm sheet steel is 189.38mm.

the variable screen (1-8) is so you can alter the number of bends as your working through a list of parts.
it works fine as long as you un check each box before the previous one.

Hi,

when i visit your page set up on my server, i get no numbers i the boxes and no numbers in any small combo box at all

I also get a page not found error with your php address in a normal browser

yeah its on our server, its an intranet site.

most boxes are blank the Dev ones should have something, but again taken from the xml, and the combos should be populated.

i'll try and make an offline copy and go from there.

Cheers
Arctic.

Hi,

Even with the new url data for me to look I get this and still no numbers in the small combo boxes?

http://fruitbeard.net/uploaded/arctic.jpg

best try for that off line one

hmm that address worked here,
my screen attached
Attachment 75237

stand down, a function is being triggered elsewhere in the script, i just need to figure out why

Thanks for your help

PROBLEM:

as it looped through each cb script looking if it was checked it was not looking to see if it was a user or script clicking the box

PHP Code:

---

case "4":
        if (cb4.selected == true){
            Size4i.visible = true;
            Size4.visible = true;
            Dev4.visible = true;
            ang3.visible = true;
            Line5.visible = true;
            cb5.visible = true;
            TID5.visible = true;
            Size4.tabIndex = 4;
            Folds = 3;
            ang3.dispatchEvent(new Event(Event.CHANGE));
        }else{
            Size4i.visible = false;
            Size4.visible = false;
            Dev4.visible = false;
            ang3.visible = false;
            Line5.visible = false;
            cb5.visible = false;
            TID5.visible = false;
            if (Folds < 2){}else{Folds = 2;}// this just said Folds = 2;
            tDev40F25 = 0;
            tDev50F25 = 0;
            tDev60F25 = 0;
            tDev70F25 = 0;
            tDev80F25 = 0;
            tDev90F25 = 0;
            ang2.dispatchEvent(new Event(Event.CHANGE));
            if (cb5.selected == true){
                cb5.dispatchEvent(new MouseEvent(MouseEvent.CLICK));
            }
            
        }
        break; 


---