is my PC haunted ?

Hi, all think I've done is assign a variable name to make it easier to refer to in my card game and this code traces the cards perfectly but not it's length. I am still not absolutely sure of the second's value in the aTemp array, but this doesn't make sense to me. Can anyone explain to me what's different in the showHands function?

Code:

---

var aSuits:Array = ["oros", "copes", "espases", "bastos"];
var aValues:Array = ["Manilla", "As", "Rei", "Cavall", "Sota", "8", "7", "6", "5", "4", "3", "2"];
var aTemp:Array = new Array();
var aDeck:Array = new Array();
var playerHand:Array = new Array();

createDeck();

function createDeck():Void
{
        for (i = 0; i < 4; i++)
        {
                for (j = 0; j < 12; j++)
                {
                        //var oCard:Object = {sCardSuit:[i], sCardNumber:[j]};
                        var oCard:Object = new Object();
                        oCard.sCardSuit = i;
                        oCard.sCardNumber = j;

                        aTemp.push(oCard);
                }
        }
        randomizeDeck();
}

function randomizeDeck():Void
{
        while (aTemp.length > 0)
        {
                var r:Number = Math.floor(Math.random() * aTemp.length);
                aDeck.push(aTemp[r]);
                aTemp.splice(r,1);
        }
        createHands();
}

function createHands():Void
{
        for (i = 0; i < aDeck.length; i++)
        {
                aTemp[i] = new Array();
                aTemp[i].push(aDeck.splice(0, aValues.length));
                trace("Player: " + (i + 1) + " - " + aTemp[i]);
                aTemp[i][0].sortOn(["sCardSuit", "sCardNumber"],[Array.NUMERIC, Array.NUMERIC]);
        }
        showHands();
}

function showHands():Void
{
        for (i = 0; i < aSuits.length; i++)
        {
                trace("Player: " + (i + 1));
               
                for (j = 0; j < aValues.length; j++)
                {
                        playerHand[i] = aValues[aTemp[i][0][j].sCardNumber] + " - " + aSuits[aTemp[i][0][j].sCardSuit];
                        trace("\t" + playerHand[i]);
                }
                trace(playerHand[i].length + " cards");
                trace("----------");
        }
}

---

Hi Cap,

I believe you are mixing the arrays up, even though you declare them to be new arrays (aTemp especially), try this then compare them

PHP Code:

---

stop();

var aSuits:Array = ["oros", "copes", "espases", "bastos"];
var aValues:Array = ["Manilla", "As", "Rei", "Cavall", "Sota", "8", "7", "6", "5", "4", "3", "2"];
var aTemp:Array = new Array();
var aDeck:Array = new Array();
var playerHand:Array = new Array();
var i:Number, j:Number, shuffle:Number;

createDeck();

function createDeck():Void
{
    for (i = 0; i < aSuits.length; i++)
    {
        for (j = 0; j < aValues.length; j++)
        {
            var oCard:Object = {sCardNumber:aValues[j], sCardSuit:aSuits[i]};
            aTemp.push(oCard);
        }
    }
    randomizeCards();
}

function randomizeCards():Void
{
    while (aTemp.length > 0)
    {
        var r:Number = Math.floor(Math.random() * aTemp.length);
        aDeck.push(aTemp[r]);
        aTemp.splice(r,1);
    }
    createHands();
}

function createHands():Void
{
    for (i = 0; i < aDeck.length; i++)
    {
        playerHand[i] = [];
        playerHand[i].push(aDeck.splice(0, aValues.length));
        playerHand[i][0].sortOn(['sCardSuit', 'sCardNumber'],[Array.NUMERIC, Array.NUMERIC]);
    }
    showHands();
}

function showHands():Void
{
    for (i = 0; i < aSuits.length; i++)
    {
        trace("Player: " + (i + 1));
        for (j = 0; j < aValues.length; j++)
        {
            trace("\t" + playerHand[i][0][j].sCardNumber + " - " + playerHand[i][0][j].sCardSuit);
        }
        trace(playerHand[i][0].length + " cards");
        trace("----------");
    }
} 


---

Yes your pc is haunted by some spanish speaking ghost. It's messed with the card suits and values.

I made a working fla out of the code I had. It's in AS3 CC and I can't publish as2. But the code is all in one place so it shouldn't be hard to convert.

Attachment 74769

Here are source files.

Attachment 74771

Hi, thanks, Moot,

great work. I appreciate you going through the trouble. I will keep it and try learning from it even though it's too much for me. I'm not even sure about two dimensional arrays or multidimensional...

I had to think my PC is haunted, have you traced out the post I wrote? I believe FruitBeard when he comments I'm mixing up arrays, but I still think the playerHand array "holder" should trace the same length than the card hands. When I changed the same code and added an extra card for each suit and used the english or french cards, I never know, it traced different lengths for each suit.

Thanks again though, it is great help. I will keep practicing.

By the way, can you please tell me how this statement works?

_global.whoseTurn = (res.t == 1) ? 2 : 1

setTurn()

is there any default value in this statement? I know it's ternary but I now need to apply some method to my card game instead of this and I'm confused with it. I guess it means if player (from the obj) is 1, change turn and viceversa, correct? Is anything similar possible for 4 people or will I need to write several conditional statements?

I told you arrays are hard and this cards problem is hard. I made a complete fla because a card game is a good way to learn arrays. I'm going to start making example fla files that I can post.

I went through your code and got it working i think. My computer has the spanish cards ghost so i can't tell.

There's some comments in there.

Code:

---

private var aSuits: Array = ["oros", "copes", "espases", "bastos"];
                private var aValues: Array = ["Manilla", "As", "Rei", "Cavall", "Sota", "8", "7", "6", "5", "4", "3", "2"];
                private var aTemp: Array = new Array();
                private var aDeck: Array = new Array();
                private var aHands: Array = new Array();
                private var nHandSize: Number = 5;
                private var nNumberOfHands: Number = 4;



                createDeck();


                function createDeck(): void {
                        var i: int = 0;
                        var j: int = 0;
                        for (i = 0; i < 4; i++) {
                                for (j = 0; j < 12; j++) {
                                        //var oCard:Object = {sCardSuit:[i], sCardNumber:[j]};
                                        var oCard: Object = new Object();
                                        oCard.nCardSuit = i;
                                        oCard.nCardValue = j;
                                        oCard.nCardNumber = aTemp.length; //  the card number is a unique number for each card, not the suit or value
                                        aTemp.push(oCard);
                                }
                        }
                        randomizeDeck();
                }

                function randomizeDeck(): void {
                        var i: int = 0;
                        var j: int = 0;
                        while (aTemp.length > 0) {
                                var r: Number = Math.floor(Math.random() * aTemp.length);
                                aDeck.push(aTemp[r]);
                                aTemp.splice(r, 1);
                        }
                        createHands();
                }

                function createHands(): void {
                        var i: int = 0;
                        var j: int = 0;
                        for (i = 0; i < nNumberOfHands; i++) {
                                aHands[i] = new Array(); //  create a new hand.  an array of oCard
                                for (j = 0; j < nHandSize; j++) {
                                        aHands[i].push(aDeck.pop()); //  push the last oCard in aDeck into the new hand                                       
                                }
                        }
                        showHands();
                }

                function showHands(): void {
                        var i: int = 0;
                        var j: int = 0;
                        for (i = 0; i < nNumberOfHands; i++) {
                                trace("Player " + i + ": ");
                                aHands[i].sortOn(["nCardValue"], [Array.NUMERIC]); //  sort on card value
                                for (j = 0; j < nHandSize; j++) {
                                        trace("Card " + j + ": " + aValues[aHands[i][j].nCardValue] + " of " + aSuits[aHands[i][j].nCardSuit]);
                                }
                                trace("----------");
                        }
                }

---

That statement is a "shorthand" "if" statement: result = condition ? (if true) : (else)

Thanks a lot, Moot,

I appreciate the help. I just began a job as a driver and hardly have time to deal with this but I will look a it every so often. I can't get started with classes yet, I think. It confuses me too much, so I'll stay with the code in the clients' timelines for now, but about the statement; will there be a simple way like it for 4 players? I'm trying to substitute it with if and else statements and I've only got it to work for the dealing...

As moot says, this: result = condition ? (if true) : (else)
It's called the Ternary Statement. Is a short and quick way of doing this: if(condition == true){ //do this } else { //do this other thing }

The code I posted is your AS2 code edited. I can't use AS2 so just copy and paste it in and change whatever gets an error - i cant see the As2 errors.

Code:

---

var aSuits: Array = ["oros", "copes", "espases", "bastos"];
var aValues: Array = ["Manilla", "As", "Rei", "Cavall", "Sota", "8", "7", "6", "5", "4", "3", "2"];
var aTemp: Array = new Array();
 var aDeck: Array = new Array();
var aHands: Array = new Array();
var nHandSize: Number = 5;
var nNumberOfHands: Number = 4;



                createDeck();


                function createDeck(): void {
                        var i: int = 0;
                        var j: int = 0;
                        for (i = 0; i < 4; i++) {
                                for (j = 0; j < 12; j++) {
                                        //var oCard:Object = {sCardSuit:[i], sCardNumber:[j]};
                                        var oCard: Object = new Object();
                                        oCard.nCardSuit = i;
                                        oCard.nCardValue = j;
                                        oCard.nCardNumber = aTemp.length; //  the card number is a unique number for each card, not the suit or value
                                        aTemp.push(oCard);
                                }
                        }
                        randomizeDeck();
                }

                function randomizeDeck(): void {
                        var i: int = 0;
                        var j: int = 0;
                        while (aTemp.length > 0) {
                                var r: Number = Math.floor(Math.random() * aTemp.length);
                                aDeck.push(aTemp[r]);
                                aTemp.splice(r, 1);
                        }
                        createHands();
                }

                function createHands(): void {
                        var i: int = 0;
                        var j: int = 0;
                        for (i = 0; i < nNumberOfHands; i++) {
                                aHands[i] = new Array(); //  create a new hand.  an array of oCard
                                for (j = 0; j < nHandSize; j++) {
                                        aHands[i].push(aDeck.pop()); //  push the last oCard in aDeck into the new hand                                       
                                }
                        }
                        showHands();
                }

                function showHands(): void {
                        var i: int = 0;
                        var j: int = 0;
                        for (i = 0; i < nNumberOfHands; i++) {
                                trace("Player " + i + ": ");
                                aHands[i].sortOn(["nCardValue"], [Array.NUMERIC]); //  sort on card value
                                for (j = 0; j < nHandSize; j++) {
                                        trace("Card " + j + ": " + aValues[aHands[i][j].nCardValue] + " of " + aSuits[aHands[i][j].nCardSuit]);
                                }
                                trace("----------");
                        }
                }

---

I took out the "private"s. I cant see what else causes an error. Say what the error is.

No, none, there was none. I like it. I will probably apply it. Thanks

it's the ternary statement which I'd like to be able to use for four players though.

would a switch case be better than ifs and elses ?

Code:

---

var t:String = resObj.t

switch (t) {
case "1" :
        player 1's turn;
        break;
case "2" :
        player 2's turn;
        break;
case "3" :
        player 3's turn;
        break;
case "4" :
        player 4's turn;
        break;
}

---

I don't get what you're asking?

The ternary operator is only for short "if" statements.

Nothing but strings should be stored in strings. The turn is a number. Try to use dynamic referencing in place of checking to see what the turn number is.

aHands[turnNumber] is the hand of the current turn.

You're right! I'm sorry.

I'm just very confused with the problem I'm having now on the server side. I'm basing myself on one example smartfox server has on the web, but it's only for two players so I'm having extra trouble understanding this.

I am trying to pass the turn to the client after positioning the card plus passing its value but I can't solve it and it seems weird because the way I created a function to pass the turn on starting the hand works.

Code:

---

function handleStart(prms, u)
{
        var obj = {}
        obj._cmd = "startHand"
        obj.tr = prms.tr
        obj.t = whoseTurn + 1
                               
        _server.sendResponse(obj, currentRoomId, null, users)
}

function handleMove(prms, u)
{
        var px = prms.x
        var py = prms.y
        var value = prms.value
                               
        var obj = {}
        obj._cmd = "move"
        obj.x = px
        obj.y = py
        obj.t = whoseTurn + 1
        obj.value = value
                               
        _server.sendResponse(obj, currentRoomId, null, users)
}

---

The first function would set the trump and pass the turn and the second one stays in player 1 when I'm back on the client. Could the value parameter in the obj cause any conflict perhaps? I really don't know if it's a reserved word which I'm not using properly.

Don't bother checking, just change it. If you're going to use regular words for variable names, avoid anything that could be a reserved word anywhere.

What is the error exactly? obj.t is incorrect?

Yes, it doesn't work. And it doesn't seem to get passed to the client where I have a trace statement for it in the receiving function. The previous one does work though, that's why I'm wondering what may go on. I don't think there may be a limit for the parameteres passed in the objects.

lol "doesn't work" isn't a good description.

There's no response? There's a response and there's no obj.t? There's a response but obj.t is incorrect?

I have not followed this thread so i don't know much about it, but try getting obj object reference out of handleStart function, so you have
reference to it everywhere.

Quote:

---

var obj:Object = new Object();
function handleStart(prms, u)
{
obj = {};

---

Hope that helps something.

Day,

sorry about that. Doesn't function then, no funciona, kaput, nicht gut, ne, malo

there is a response but obj.t won't even trace out whilst the rest of the params do get back. Cards are placed in their new positions and their value traces out from the client side.

Still haven't tried out what angel suggests...

in the function before this one, I coded the turn exactly the same way whoseTurn + 1 before passing it and it is received.

Yeah I can't help with the backend stuff unless I can see all the code and know what the output is.

Hi, Moot, good day,

I'm attaching my extension on the server side plus the code in the client side. I've just noticed my extension handler receives the turn in the client side so the problem must be in the setTurn function in the client even though I still wonder why it won't react or respond (not to mention work :)) like the handleStart function which allows the turn change.

Sorry, but I can't help with this.

I'd need the _server.sendResponse() code (this function and any code it uses), the backend code or api, and I'd need to know what the messages or output is.

Hi,

Moot, Cap.

It is all done using http://smartfoxserver.com/ engine, which utilises java code that you install on your own computer when you use the smartfox server stuff. I believe you are using the SFS Pro Cap!

I know some of the smartfox stuff as I helped Cap with his chat room server, smartfox can be a pain in the ^&^*%% just getting it to work in the first place and I don't think you will want to install it Moot unless you are going to use it.

Theres no real way to understand the output or input without seeing it happen in real time on your own computer

Ouch!

you got me there. The _server.sendResponseCode could be this:

Code:

---

function handleMove(prms, u)
{
        var px = prms.x
        var py = prms.y
        var value = prms.value
                               
        var obj = {}
        obj._cmd = "move"
        obj.x = px
        obj.y = py
        obj.t = whoseTurn + 1
        trace("whoseTurn = "+whoseTurn);
        trace("player index = "+u.getPlayerIndex());
        obj.value = value
                               
        _server.sendResponse(obj, currentRoomId, null, users)
}

---

but I do not know what the backend code means. Not even too sure about the API...

Is the backend Java and the API the classes for flash to interpret it?

Excuse my ignorance. I will give up posting if I'm way too far behind when I can't understand something that should be basic. I thought once I had the extension and the client in flash set, I'd be able to go on just trying to apply common sense to the coding in the extension and the client's timelines.

I'm only working on this as a hobby and don't want to take you people's time, but, without meaning to criticize smartfox, they have no examples for over 2 players and I don't know where else to ask. They have helped me enough as well.

I'll keep working at my own pace and maybe I will attach everything when I'm able to make a skeleton version of my fla excluding the images so I can fit it here.

That's what's hard in forums like these, you don't know what people know.

I know youre on smartfox from a previous post and what smartfox is. I was just saying I can't help you with smartfox because I don't have the code (or the framework installed) and I can't see the error. When you ask about an error with your actionscript, you show me the code and I can try it myself if I need to. I have no idea how to debug smartfox. I can help with regular php, .net, and stuff.

For websites and applications (internet applications), you can call the server and its software (php, net, databases, java), the backend, the files you download as a user (what you see and use) (swf, html, javascript, css) the frontend.

API is how you use somebody else's code. _server.sendResponse() is in smartfox's API - it's a function you use to control their code.

Good day,

I see. Or I see quite better now. Thanks for the explanation.

Som isn't this function where the response lies?

Code:

---

function handleMove(prms, u)
{
        var px = prms.x
        var py = prms.y
        var value = prms.value
                               
        var obj = {}
        obj._cmd = "move"
        obj.x = px
        obj.y = py
        obj.t = whoseTurn + 1
        obj.value = value
                               
        _server.sendResponse(obj, currentRoomId, null, users)
}

---

the px prms and the py are for the cards new location (from the hand to the table), the value keeps the cards' values. These two parameters get back to my client and work :) (excuse me but I can't find a synonym for that) and then the obj.t should be the turn handled by the server. I'm receiving the turn shift because my client traces whoseTurn = 2 but I'm either doing something wrong in the setTurn function in my client or I really don't have an idea... below is the setTurn function and it works when I start off the game setting a trump that's why I can't imagine what is happening.

Code:

---

function setTurn() {
        if (_global.myID == whoseTurn) {
                trace("whoseTurnClient = "+_global.whoseTurn);
                _root.turn_txt.text = "It's "+this["player"+whoseTurn+"Name"]+" turn";
        }
        if (iAmSpectator) {
                _root.turn_txt.text = "It's "+this["player"+whoseTurn+"Name"]+" turn";
        } else {
                _root.turn_txt.text = "It's "+this["player"+whoseTurn+"Name"]+" turn";
        }
}

---

I would create a simple test file to figure out how the communication between the swf and smartfox works. Just pass a variable back and fourth so you know it works and know how.

_server.sendResponse(obj, currentRoomId, null, users) - is a custom function SmartFox created for you to use. It's the one that sends obj to your swf.

The game is controlled by one of the swfs, the dealer, who passes cards to other swfs?

You have to stop using bad variable names. You are using "x" as a variable name. Think about it. That's the position of your object, it's reserved, it's not a variable name.

This is updated using your own variable names in place of the reserved words:

Code:

---


//  create one object and update it?  put it here
//  var obj = {}


function handleStart(prms, u)
{
    var obj = {}  //  new object
    obj._cmd = "startHand"
    obj.tr = prms.tr
    obj.t = whoseTurn + 1
               
    _server.sendResponse(obj, currentRoomId, null, users)
}



function handleMove(prms, u)
{
    var px = prms.px
    var py = prms.px
    var value = prms.cardValue
               
    var obj = {} //  new object
    obj._cmd = "move"
    obj.px = px
    obj.px = py
    obj.whoseTurn = whoseTurn + 1
    obj.cardValue = value
               
    _server.sendResponse(obj, currentRoomId, null, users)
}

---

Hi,

You have a long way to go yet Cap, this is probably the beginning of many more problems, I can get it to work with 2 players too although it gives errors, this image might help you along a little, you might also want to change *res.n = u.getName()* to *res.n = users.getName()*Attachment 74807 I have no idea hot to play the game though, perhaps some instructions might help

You were getting these errors in the cmd window too

Code:

---

[ WARNING] > Error in extension [ botifarra.as ]: TypeError: can not call method "getName" of undefined (botifarra.as~1654) Internal:77 -- Line number: 77 in file: botifarra.as

---

Good day,

thanks for the replies. Funny because I thought I had passed you the updated version FruitBeard. I did get past that and I have all my players in the right place and with the right names. That message, I asked about at smartfox forums and I was told not to worry and keep testing. It's complicated, I know no one said this would be easy, but it is especially when you don't know where to reach for help. The administrator panel should also trace the players' Ids but even in their examples it doesn't.

Thanks for taking a look at it though. I will get back to it in time (I hope as2 still exists by then :)) I thought using reserved words would not be advisable, thanks...