-
Senior Member
graphical bug . . .
1) Create an Ellipse
2) Add Anchors at random around the ellipse
3) Drag a couple of those anchors in towards the center of the ellipse
4) Select the Rotate Tool and rotate it a little bit
5) Create a Motion Path
6) Drag the Ellipse around the screen
The Red "Anchor" points seem to go all over the place (they stay on the screen in various places as you drag the object around) . . .
The problem above doesn't necessarily effect the "playing" of the movie or scene - but can make an awful mess of things while creating the movie . . .
Also, a few times it drew a line across the scene which didn't go away while playing ( a straight thin line across 3/4 of the scene) . . . However, I can't seem to reproduce that bug . . . But, it was the exact same process as the one above . . . but, the second bug only happened once out of ten tries . . . I'll keep trying to get it to screw up - but hopefully it won't . . .
I'll keep lookin'
Peaces
Cadence
[Edited by Cadence on 02-17-2001 at 06:08 AM]
-
Re: graphical bug . . .
Originally posted by Cadence
1) Create an Ellipse
2) Add Anchors at random around the ellipse
3) Drag a couple of those anchors in towards the center of the ellipse
4) Select the Rotate Tool and rotate it a little bit
5) Create a Motion Path
6) Drag the Ellipse around the screen
The Red "Anchor" points seem to go all over the place (they stay on the screen in various places as you drag the object around) . . .
[Edited by Cadence on 02-17-2001 at 06:08 AM]
I can't reproduce it.
Please send the swi to hhchang@optushome.com.au
Thanks,
Hung-Hsin
-
Originally posted by dbd
Curved Motion Path:
Even when you deselect Curved Path and save, when you open the file again the object still has a curved path.
This feature is REALLY FABULOUS, works great for orbs etc. but when using it on a ball bouncing...well let's say it has an "outta this world" feel. :=)
Dawn
Fixed!
-
Re: Two bugs
Originally posted by flashopper
Found two:
1. drew a bezier shape, then tried to add a "Repeat Frames" effect at frame 0 to see what this new effect was and got a nasty error that said an error log was being generated. The only option was to push the cancel button, at which time the program closed;
Will
Fixed!
Hung-Hsin
-
Re: Exit Swish Bug with the Fix Update
Originally posted by Rykor
Swish gives me an error each and everytime I exit and this is with the fix that was just uploaded by David.
SWISH200 caused an invalid page fault in
module KERNEL32.DLL at 0167:bff7a138.
Registers:
EAX=00000000 CS=0167 EIP=bff7a138 EFLGS=00010206
EBX=017d32d0 SS=016f ESP=0094fd28 EBP=0094fd5c
ECX=01000100 DS=016f ESI=017d23bc FS=12bf
EDX=01000100 ES=016f EDI=00000f14 GS=0000
Bytes at CS:EIP:
89 51 08 8b 53 08 8b 43 04 89 42 04 8d 93 0b 10
Stack dump:
0094fd5c 017d23bc 017b0000 00000000 bff7b31d 017b0000 017d23bc 00000f14 00000200 006c9d18 017d23c0 00000000 017d23bc 0094fe38 0058add0 017b0000
Fixed!
Hung-Hsin
-
Re: Scene/Sprite Bug
Originally posted by Rykor
I'm not sure how exactly to say this so if u need more I can send you a zipped SWI file.But I made my first scene as a template for the rest and I made a sprite that would appear to have a scrolling effect for each scene.Howecer later down this process I downloaded alpha 6 and found that when I go from scene to scene the sprite stays the same even the I gave each sprite theyre own names and each one had a different text in it.Why would the sprite not change from scene to scene as well.
Since those text objects of different scenes are at the same depth and SWF only allows one object to be defined at any given depth, you have to hide the text before it jumps to the other scene.
Hung-Hsin
-
Re: It will be fixed
Originally posted by David Michie
In the fixed version the Movie tab color corresponds
to the selected Scene tab color. If you change the
color of the selected scene the movie changes and
vice versa.
Just waiting for Hung-Hsin to fix something...
Cheers, David.
The behavior of background color setting is changed. The scene's background is on the top of movie's background. If the scene background is 100% transparent(default), the movie background color is used. If the scene's background is 100% opaque, the scene's background color is used.
Hung-Hsin
-
Originally posted by Rykor
Originally posted by David Michie
Ok, we've reproduced it.
I was using the Scene tab, and you were using the Movie tab.
If you use the Scene tab it will work fine, but I'll fix it anyway.
Cheers, David.
Maybe you should make the movie tabs background to make all the scenes that color and the scenes tab to change them individually.
BRILLIANT SUGGESTION ... I agree ... this makes the most sense !!!
Tnx.
---flash777---
-
(HH) ...
1. I drew a simple short horizontal line (default width)
2. I tried 6 or 7 times to select the line with the selection tool ...
nada, zip squat.
3. Finally, it selected. Repeated the process ... same problems ...
it appears the sensitivity (or something) to select needs tweaking
4. The "Snake" effect (or any effects below the separator bar) are
grayed-out ... does this mean they are NOT available for lines,
images, etc. ???
Tnx.
---flash777---
-
Originally posted by flash777
(HH) ...
1. I drew a simple short horizontal line (default width)
2. I tried 6 or 7 times to select the line with the selection tool ...
nada, zip squat.
3. Finally, it selected. Repeated the process ... same problems ...
it appears the sensitivity (or something) to select needs tweaking
4. The "Snake" effect (or any effects below the separator bar) are
grayed-out ... does this mean they are NOT available for lines,
images, etc. ???
Tnx.
---flash777---
Yea the lines are hard to select, sometimes you have to select it in the outline or timeline to select. My biggest problem with lines though is trying to lengthen them if you mouse over the end of the line it gives a diagonal arrow and then doesnt make any change to the line when dragging.
-
Originally posted by flash777
(HH) ...
4. The "Snake" effect (or any effects below the separator bar) are
grayed-out ... does this mean they are NOT available for lines,
images, etc. ???
Tnx.
---flash777---
Since complex effects can only be applied to grouped objects, you have to group the objects first.
Hung-Hsin
-
Senior Member
Can't send .swi . . .
Mr. Chang . . .
I apologize but I can't send you a .swi file, because as I tried to explain - the problem isn't in the "playback" of the scene or movie - it's only during the creation of the movie . . . Will someone else try this and see if they get the same outcome . . .
Here is a ScreenShot of the problem as I describe it
http://www.purifiedproductions.com/Images/mess1.jpg
Simple :
1) Create an Ellipse
2) Select the rotate tool
3) Grab an anchor on the corner of the ellipse and rotate it as much as you'd like
4) Grab the center of the ellipse and drag it all over the screen . . .
The image is exactly how it appears every time I try it . .
It works fine unless I use the rotate tool . . . Without using the rotate tool - I can drag it all over the screen and nothing will happen . . .
After you deselect the image - the screen returns to normal.
Like I said, it doesn't effect the playback - or anything after you deselect the ellipse - but it makes an awful mess of the screen as I try to move it around.
Thanks - and if it's just my computer - then I apologize for the mix up . . .
But, look at the image at the link above - and you'll see what I mean . . .
Peaces
Cadence
-
Re: Can't send .swi . . .
Hey Cadence...don't throw that away...you might be able
to make some $$$ with it an Avante Garde Art Auction
-
Senior Member
-
Re: Can't send .swi . . .
Originally posted by Cadence
Mr. Chang . . .
I apologize but I can't send you a .swi file, because as I tried to explain - the problem isn't in the "playback" of the scene or movie - it's only during the creation of the movie . . . Will someone else try this and see if they get the same outcome . . .
Here is a ScreenShot of the problem as I describe it
http://www.purifiedproductions.com/Images/mess1.jpg
Simple :
1) Create an Ellipse
2) Select the rotate tool
3) Grab an anchor on the corner of the ellipse and rotate it as much as you'd like
4) Grab the center of the ellipse and drag it all over the screen . . .
The image is exactly how it appears every time I try it . .
It works fine unless I use the rotate tool . . . Without using the rotate tool - I can drag it all over the screen and nothing will happen . . .
After you deselect the image - the screen returns to normal.
Like I said, it doesn't effect the playback - or anything after you deselect the ellipse - but it makes an awful mess of the screen as I try to move it around.
Thanks - and if it's just my computer - then I apologize for the mix up . . .
But, look at the image at the link above - and you'll see what I mean . . .
Peaces
Cadence
You can still send me the swi with the rotated ellipse, so i can easily reproduce the problem by dragging it.
Hung-Hsin
-
Senior Member
-
Gradients keep resetting
Great work!
Gradients keep resetting themselves to their default position and angle after clicking OK in their properties window and after deselecting the object. Also negative numbers aren't allowed in the property window's rotation value.
=)
-
Re: Gradients keep resetting
Originally posted by spam.lover
Great work!
Gradients keep resetting themselves to their default position and angle after clicking OK in their properties window and after deselecting the object. Also negative numbers aren't allowed in the property window's rotation value.
=)
Fixed!
Hung-Hsin
-
Originally posted by flash777
(HH) ...
1. I drew a simple short horizontal line (default width)
2. I tried 6 or 7 times to select the line with the selection tool ...
nada, zip squat.
3. Finally, it selected. Repeated the process ... same problems ...
it appears the sensitivity (or something) to select needs tweaking
---flash777---
Ok! I've made it easier to select an object with very small width.
Hung-Hsin
-
Hi Hung-Hsin,
When you try to select a different Alpha value, the mouse almost always rolls over another color so you either have to reset the color or choose the color menu on the top right of the panel to change the Alpha value without changing the color. If the R G B and Alpha input boxes were moved below the palette (just above or below the MRU indicator) , this would probably not happen. Guess this is a Swish wish, sorry, you must be going crazy with all these bug reports...but if you had "louder" shirts, maybe you would be in the US with David and Roger. :=)
Thanks
Dawn
BTW: Great work with all the fixes!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Click Here to Expand Forum to Full Width
|