++LAST RESORT U GUYS!!!!!

[mdesign]

Hello Everyone

I have made a swf movie. 160kb.
My main timeline has 50 frames, in that is MC's.

At the start of that i have a preloader, i have tried around 50 different preloaders from simple to percentage/bar preloaders.

THE PROBLEM:
When loaded it shows a blank screen.45 secs in total (56k modem)

Then the preloader starts working, which is allready 45 percent of the way through, then continues on at works fine.

Something is very wrong.
I dont have the time to start over again.

I can send the fla. to anyone who can take a look..

Here's the link to the site:

http://www.intellectgraphix.com

Any info or help would be greatly appreciated..

thx
+SHaun

[robogumby]

Have you tried the preloaders by them self ?
try creating a simple movie with about 50 to 100 frames and dump some big graphics or sound files on the time line and try running it under flash the Alt - Enter and cut the bandwith to check. you might also try changing you publishing options (load order) if these dont help i'll have a look at the fla for you.

Regards

Another Melbourne Flasher :-)

[arcadenetwork]

Probably using the attachsound() command?!?!? This does that cos it loads that on loading the first frame I think.

------------------------------------
Visit http://board.arcadenetwork.com

[micmac]

thanks guys,

Robogumby, i have tried that, preloaders a working fine, there's something in my movie triggering this off..not sure.
thanx heaps. Melburning the flash seen..

Arcadenetwork, that does sound promising, i must give that a go.

thanx guys once again..

cheers
+mdesign