Enter cartier.com select=>cartier selection =>watches . then look at the effect menu
Enter cartier.com select=>cartier selection =>watches . then look at the effect menu
and take a look the rollover effect when you rollover any of the model; nice ahhh !!!!
ok i really need to know how could that be done ,, and i am planing to take this post ti´ll the end..
i invite professionals from flash kit , all of us to figure out how to do it ,, this will be a real interesting thread for all of the flashkit members and will teach us a real good visual effect for our future proyects ..
i will prepare an ideal example .fla for all of us to work with ..
including 5 pictures and 5 botons so we can begin working on it ..
consider this thread open for any proposal to reach the goal.
You mean the scrolling images when you mouse over the text menu. That is the old Barney's menu thing. Its as simple as having all images inside a movieclip and have the buttons tell what position the movieclip should scroll to.
//ON the movieclip
onClipEvent(load){
// Initial Movieclip Position
_root.xpos=0;
}
onClipEvent(enterFrame){
this._x+=(_root.xpos-this._x)/7;
}
Mr. Pellepiano ..
I really dont know what to say,
but wen you say "old Barney's menu thing" i feel that seems that i missed something .. or that i am newbier than i thought..
to be sincere with you i feel , that there is still to much to learn about flash .. at least for me ..
i just thought that the effect was so nice , that it was going to be a real challenge to be able to reproduce it .
but . i see you alreday know how to.
i will try your instructions ..
//ON the movieclip
onClipEvent(load){
// Initial Movieclip Position
_root.xpos=0;
}
onClipEvent(enterFrame){
this._x+=(_root.xpos-this._x)/7;
}
hello .
i really havent had the time for trying the codes ..
cause i am almost finished with a customer´s proyect..
by the way the proyect you had helped me ..
take a look at it . http://malabar.com.ve/prueba.html
but i have now two main problems..
1) i made the site for 800x600 resolution , but when on 1024 or higher it looses all designed purpose ,, i need a way so it can automatically strech on the screen when on higher resolution ?
2) i also need to know that elasticity effect for the pictures coming in ? in a manner that when picture comes in , slows down and almost get into the end franme , and automatically backwards a little bit (elasticity) i imagine .
if goes into your possibilities , i will much appreciate ..
Pellepiano this is about old barney´s image effects
Hi there..
i have being lost for couple of days , i went to the beach for the weekend , and a stayed for 9 days in a row ,, i really needed some rest ,, out of the monitor ..
Ok mr. pellepiano a tryied your script for old barney´s image effects
but i am really lost i made this .fla attached.. please help me understanding the script ..
You have a tweening in the movieclip, it should not be there as you now have actionscripted motion. Otherwise the file works fine BUT you have entered the wrong xpos values (on the buttons ) so the movieclip never enters the stage ( well it does but the graphics inside should start at the middle ( x position 0 of the movieclip ), not 500 pixels to the right.
but .. how should i insert the pictures into the movie clip ?
i mean if you said that i should not have tweening , then how ? each picture on a individual frame ? or all of them in the same frame ? i am really confused ...
yes !!
it is working as you said.
there are no words to thanks all the teaching you´re giving me ,, i really mean thanks . mr. Pellepiano .
ok .., heres the working .fla
but i dont undersand why it does not fit exactly into the positions i give the botton , it always goes lefter than the original x position i give it ?
i have being trying to figure it out but . seems that is not controlable .
probably i did something wrong! that i havent notice ..
onClipEvent (load) {
// Initial Movieclip Position
_root.xpos = -50.5;
}
onClipEvent (enterFrame) {
this._x += (_root.xpos-this._x)/5;
//esta parte es elasticidad
var speed = 8;
var viscosity = 1.6;
//X Pos
difference = _root.xpos-this._x;
xvelocity = (xvelocity+(difference)/speed)/viscosity;
this._x += xvelocity;
}
what happened if i have many Mc that requires movement ?
i mean _root.xpos works on this Mc .. but if a i have also another Mc should i name the variable _root.xpos or should i not repeat the name and have a _root.whateeverxpos= ?
If you have several mc's just name the xpos to xpos1 xpos2 and so on. You can have as many as you want. ( note that the more scripts that are running at the same time , the slower performance of the movie).