A Flash Developer Resource Site

Results 1 to 2 of 2

Thread: Cue Point Problem

  1. #1
    Junior Member
    Join Date
    Jul 2007
    Posts
    13

    Cue Point Problem

    Project
    I have a project involving several modules. The project is developed in Flash 8 Professional.

    Background
    Each screen is driven by a .flv file that syncs up the voice over with text as it appears on screen. The cue point names are entered during the import procedure. I finished this first module last year and all went well - www.lni.wa.gov/chairadjustment.asp. Im now working on the second module that needs to have the same look, feel, and operation as the first and needs to be able to work with the first module as one total project. Therefore, Ive needed to include many of the original file elements in this second module.

    Problem
    The problem Im running into is that while the same approach is working as intended on many of the screens, on some screens the .flv file will play through the cue points of the screen, not stopping at the cue points as it normally would, and then returns to the first cue point and begins to play and stop normally through the cue points for that screen. Although the problem persists in Flash 8 both Mac and Windows versions, Ive tested it in CS4 and the results are the same. Although, this problem is predominant for these same screens, sometimes it also plays intermittently normal but it is not reliable.

    Attempted Solutions
    Ive talked with Adobe Technical support. Their advice - before transferring file elements from module one to module two, they recommended saving, compacting, deleting ASO files and transferring original file elements layer by layer, from the module one to module two and then re-importing the video/.flv files. Ive attempted these things and the problem still persists. However, if I create a new file stripped of the original project elements, isolate just the .flv files and cue points with simple text of the problem screens, they work reliably. The problem is I need to use the original project elements. It appears there may be some corruption in the original file elements. Any suggestions on how to resolve this? Please advise.

    Thanks!
    James Kozick
    jamesk@pacificmm.com

  2. #2
    Use cue point to find the key-frame?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




Click Here to Expand Forum to Full Width

HTML5 Development Center