Making Glass Aquarium Repairs
____________________________________
Why Leaks Occur & Common Mistakes to Avoid When Making Repairs
A couple downsides to having a glass aquarium is the potential for springing a leak and glass breakage to occur. You can figure out for yourself how breaks happen. For leaks, most are usually caused by a flaw or failure in the sealant, either generated during construction of the tank, or over time becomes weak and begins peeling away from the glass. This can lead to leaks of a small annoying pin hole size, up to and including a major seam blowout, like ones that result in an empty tank, a soaked carpet, and water leaking through the floor down into the basement.
Most often pin hole sized leaks can be fixed from the outside, without having to totally drain or tear the whole tank apart, but for major leaks or glass breakage, this requires some reconstruction of the tank. The good news? Repairing a leak is actually not a difficult task, whether it be a major or a minor one. When we began building glass aquariums for our fish collection business in 1989, we were treated to our fair share of leaks. However, learning from our mistakes lead to great success in building, as well as repairing our aquariums over the years. Even today the 55g aquarium in our living room is one of the originals we built, and many of the others we gave away are still in use as well.

Common Mistakes To Avoid

Don't use the wrong kind of silicone sealant; use only a non-toxic 100% silicone sealant appropriate for aquarium use.
Not cleaning and preparing the glass surface properly or adequately enough.
Not pinpointing the exact location of where a small leak is coming from. Water will always be present at the bottom of the tank (gravity rules), but the source may be somewhere else up higher or sideways along the joint or seam.
Not repairing a large enough area up, down, or around where the actual leak generates from.
Not using enough silicone sealant.
Not allowing the silicone to dry long enough.
Not aligning or placing the glass pane edges flat and evenly together.
Don't make major repairs under humid conditions. Duct tape will not stick to glass when it is humid, therefore, the glass may move before the silicone can set up. Humidity slows the silicone curing process as well.
Not having the aquarium sitting on a flat surface doesn't cause bad repairs, but one time we had an aquarium crack all the way across the bottom pane of glass, which wasn't broken when we started out. How do you think we figured out how to make a complete break repair?
So what will you need, and how do you go about repairing a leak?

Here is a list of items what you'll need for fixing leaks, as well as build a tank from scratch.

Single edged razor blades.
Acetone.
A non-Toxic 100% silicone sealant. We have used NAPA (part #765-1336) with good results for years, or use All-Glass® Brand 100% Silicone Sealant or a similar type aquarium sealant.
Paper towels.
A washable felt tip marker.
For repairing major leaks or building a DIY aquarium, a roll of duct tape.
For building a DIY aquarium, some emery cloth or silicone carbide sandpaper.
Keeping the common mistakes to avoid in mind that we previouslyyou are now ready to get started.
How To Repair Small Leaks in 9 Easy Steps
How To Repair Major Leaks or Replace Broken Glass
How To Build a DIY Glass Aquarium (up to 55 gallons in size).
For more tips on patching or repairing aquariums, read Fixing a Small Aquarium Leak from the Aquatics Unlimited Tip of the Week Archive, and refer to these other DIY Aquarium Projects & Repair Resources.

Thought this might be interesting for all you fish lovers
Regards